Seamless Aluminum Pipe – Series 6061-T6 Schedule 80

Seamless Aluminum Pipe in Series 6061-T6 Schedule 80 offers durability and strength for demanding applications. This series is the least expensive and most versatile of the heat-treatable aluminum alloys, providing good mechanical properties and corrosion resistance. Widely used in truck bodies, frames, screw machine parts, and structural components where superior strength and corrosion resistance are crucial. Common sizes include 1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, and 2″ diameters. Grades available include ASTM B241 and UNS A96061 standards.

Seamless Aluminum Pipe – Series 6061-T6 Schedule 80 is a high-strength, corrosion-resistant aluminum pipe used in heavy-duty industrial applications, including construction, transportation, and high-pressure systems. It offers excellent weldability and machinability.

Application: Construction, transportation, high-pressure systems, and heavy-duty industrial applications.

Standards: ASTM B210, ASME SB210

Common Sizes:

– Outside Diameter: 1/2 inch – 12 inches (12.7 mm – 304.8 mm)
– Wall Thickness: 0.095 inch – 0.500 inch (2.41 mm – 12.7 mm)
– Length: 10 feet – 20 feet (3.05 meters – 6.1 meters)

Mechanical Properties:

– Tensile Strength: 45,000 psi (310 MPa)
– Yield Strength: 35,000 psi (241 MPa)
– Elongation at Break: 12%

Chemical Composition:

– Aluminum (Al): 95.0% min
– Silicon (Si): 0.40-0.80%
– Iron (Fe): 0.70% max
– Copper (Cu): 0.15-0.40%
– Manganese (Mn): 0.15% max
– Magnesium (Mg): 0.80-1.20%
– Chromium (Cr): 0.10% max
– Zinc (Zn): 0.10% max