Seamless Aluminum Pipe – Series 6061-T6 Schedule 40

Seamless Aluminum Pipe in Series 6061-T6 Schedule 40 provides versatility with a balance of strength and corrosion resistance. This series is the least expensive and most versatile of the heat-treatable aluminum alloys, offering good mechanical properties and corrosion resistance. It is commonly used in a wide variety of products and applications, including truck bodies, frames, screw machine parts, and structural components where appearance, corrosion resistance, and strength are essential. Common sizes include 1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, and 2″ diameters. Grades available include ASTM B241 and UNS A96061 standards.

Seamless Aluminum Pipe – Series 6061-T6 Schedule 40 is a high-strength, corrosion-resistant aluminum pipe used in industrial applications, including construction, transportation, and machinery. It offers excellent weldability and machinability.

Application: Construction, transportation, machinery, and general industrial applications.

Standards: ASTM B210, ASME SB210

Common Sizes:

– Outside Diameter: 1/2 inch – 12 inches (12.7 mm – 304.8 mm)
– Wall Thickness: 0.062 inch – 0.250 inch (1.57 mm – 6.35 mm)
– Length: 10 feet – 20 feet (3.05 meters – 6.1 meters)

Mechanical Properties:

– Tensile Strength: 45,000 psi (310 MPa)
– Yield Strength: 35,000 psi (241 MPa)
– Elongation at Break: 12%

Chemical Composition:

– Aluminum (Al): 95.0% min
– Silicon (Si): 0.40-0.80%
– Iron (Fe): 0.70% max
– Copper (Cu): 0.15-0.40%
– Manganese (Mn): 0.15% max
– Magnesium (Mg): 0.80-1.20%
– Chromium (Cr): 0.10% max
– Zinc (Zn): 0.10% max